Loading ...
Loading ...
Loading ...
Figure 5-219 Wi-Fi (2)
Step 2 Congure the settings for the Wi-Fi connection parameters.
Table 5-60 Wi-Fi connection parameters
Parameter Description
Connect Automatically
Enable Connect Automatically.
After the Device is restarted, it will automatically connect to
the nearest hotspot that had been connected successfully.
Refresh
Refresh the hotspot list. The self-adaption function such as
adding password is supported if such setting was once
congured.
Connect
In the hotpots list, select a hotspot, and then click Connect.
●
To reconnect the same hotspot, disconnect rst and then
reconnect.
●
To connect to other hotspot, disconnect from the current
connected hotspot rst, and then connect to the other
hotspot.
Disconnect To disconnect from a hotspot, click Disconnect.
Step 3 (Optional) Click Firmware Update, select related rmware le, and then click OK.
Step 4 Click Apply to complete the settings.
After the Device is connected to a Wi-Fi hotspot, in the Wi-Fi Info area, the current
hotspot, IP address, subnet mask, and default gateway are displayed.
5.15.1.4 Conguring 3G/4G Settings
User's Manual
275
Loading ...
Loading ...
Loading ...