Loading ...
Loading ...
Loading ...
Parameter Description
Preview Channel
Select the channel that you want to preview to help monitor the
channel of access point. This channel could be the channel of
access point or any other channels according to your actual
situation.
Event Type Select event type as High Humidity or Low Humidity, and set the
upper and low humidity limit respectively. For example, select
event type as High Humidity and set upper limit as 60, the alarm
occurs when the humidity reaches 60%RH.
Upper Limit
Enable Enable the alarm function.
Schedule
Click Setting to congure the parameters.
Dene a period during which the motion detection is active. For
details, see "5.10.4.1.2 Setting Motion Detection Period".
PTZ Linkage
Click Setting to display the PTZ page.
Enable PTZ linkage actions, such as selecting the preset that you
want to be called when an alarm event occurs.
Alarm-out Port
Click Setting to congure the parameters.
●
Local Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
●
Extension Alarm: Enable alarm activation through the
connected alarm box.
●
Wireless Siren: Enable alarm activation through devices
connected by USB gateway or camera gateway.
Post-Alarm
Set a length of time for the Device to delay turning o alarm after
the external alarm is cancelled. The value ranges from 0 seconds to
300 seconds, and the default value is 10 seconds.
Post Record
Set a length of time for the Device to delay turning o recording
after the alarm is cancelled. The value ranges from 10 seconds to
300 seconds, and the default value is 10 seconds.
Anti-Dither
Congure the time period from end of event detection to the stop
of alarm.
Record Channel
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm event occurs.
The recording for IoT alarms and auto recording function must be
enabled. For details, see "5.1.4.9 Conguring Recorded Video
Storage Schedule" and "5.9.1 Enabling Record Control".
Snapshot
Select the Snapshot checkbox to take a snapshot of the selected
channel.
To use this function, select Main Menu > CAMERA > Encode >
Snapshot, in the Type list, select Event.
User's Manual
262
Loading ...
Loading ...
Loading ...