Loading ...
Loading ...
Loading ...
5.15.1.5 Conguring PPPoE Settings
Background Information
PPPoE is another way for the Device to access the network. You can establish network connection
by conguring PPPoE settings to give the Device a dynamic IP address in the WAN. To use this
function, rstly you need to obtain the username and password from the Internet Service Provider.
Procedure
Step 1 Select Main Menu > NETWORK > PPPoE.
Figure 5-224 PPPoE
Step 2 Enable the PPPoE function.
Step 3 In the Username box and Password box, enter the username and password accordingly
provided by the Internet Service Provider.
Step 4 Click Apply to complete the settings.
The system pops up a message to indicate the successfully saved. The IP address appears
on the PPPoE page. You can use this IP address to access the Device.
When the PPPoE function is enabled, the IP address on the TCP/IP page cannot be
modied.
5.15.1.6 Conguring DDNS Settings
When the IP address of the Device changes frequently, the DDNS function can dynamically refresh
the correspondence between the domain on DNS and the IP address, ensuring you access the
Device by using the domain.
Prerequisites
Conrm if the Device supports the DDNS Type and log in the website provided by the DDNS service
provider to register the information such as domain from PC located in the WAN.
User's Manual
279
Loading ...
Loading ...
Loading ...