Loading ...
Loading ...
Loading ...
5.15.1.4.1 Through the Wireless 3G/4G Module
You can connect a wireless 3G/4G module to the USB port of the Device and then access the Device
with the IP address provided by the module.
This function is available on select models.
Procedure
Step 1 Connect the wireless 3G/4G module to the USB port of the Device.
Step 2 Select Main Menu > NETWORK > 3G/4G.
Figure 5-220 3G/4G
The 3G/4G page consists of three areas:
●
Area 1: Displays the signal strength.
●
Area 2: Displays the module congurations.
●
Area 3: Displays the connection state.
The information of Area 2 will display after the 3G/4G module is connected; while the
information of Area 1 and Area 3 will display only after the 3G/4G function is enabled.
Step 3 The Device starts identifying the wireless module and displays the recognized
information for the parameters in Area 2.
Table 5-61 Recognized information
Parameter Description
NIC Name Displays the name of Ethernet card.
User's Manual
276
Loading ...
Loading ...
Loading ...