Loading ...
Loading ...
Loading ...
Parameter Description
Record Channel
Select the channel(s) that you want to record. The selected channel(s)
starts recording after an alarm event occurs.
The recording for motion detection and auto recording function must
be enabled.
PTZ Linkage
Click Setting to display the PTZ page.
Motion detection can only activate PTZ preset.
Post Record
Set a length of time for the Device to delay turning o recording after
the alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
Tour Select the Tour checkbox to enable a tour of the selected channels.
Picture Storage
Select the Snapshot checkbox to take a snapshot of the selected
channel.
To use this function, select Main Menu > CAMERA > Encode >
Snapshot, in the Type list, select Event.
Sub Screen
Select the checkbox to enable the function. When an alarm event
occurs, the extra screen outputs the settings congured in Main
Menu > DISPLAY > Tour > Sub Screen.
●
This function is available on select models.
●
To use this function, extra screen shall be enabled.
Video Matrix
Select the checkbox to enable the function. When an alarm event
occurs, the video output port outputs the settings congured in Main
Menu > DISPLAY > Tour.
This function is available on select models.
Buzzer Select the checkbox to activate a buzzer noise at the Device.
Log Select the checkbox to enable the Device to record a local alarm log.
Alarm Tone
Select to enable audio broadcast/alarm tones in response to a motion
detection event.
Warning Light Select the checkbox to enable warning light alarm of the camera.
Siren Select the checkbox to enable sound alarm of the camera.
Step 3 Click Apply to save the settings.
●
Click Default to restore the default setting.
User's Manual
183
Loading ...
Loading ...
Loading ...