Loading ...
Loading ...
Loading ...
62
Note: If you did not install Epson ScanSmart, make sure Epson Scan 2 and Document Capture Pro
(Windows) or Document Capture (Mac) are installed on the computer connected to the scanner.
Document Capture Pro (Windows) and Document Capture (Mac) do not support scanning from the
start button on your scanner over a wireless network (ES-300W/ES-300WR). Launch Epson Scan 2
before scanning from the start button on your scanner.
1. Make sure the scanner is connected to your computer or network (ES-300W/ES-300WR).
2. If you are scanning using the ADF, slide the mode selector to ADF. If you are scanning a business
or plastic card using the card slot, slide the mode selector to card.
3. Load an original in your scanner.
4. Press the start button.
The scanner starts the job that was assigned to the start button in Document Capture Pro
(Windows) or Document Capture (Mac).
Note: You can view or change the scan settings using Document Capture Pro (Windows) or
Document Capture (Mac).
Adding and Assigning Scan Jobs with Document Capture Pro - Windows
Assigning Start Button Settings or Scan Jobs - Mac
Parent topic: Starting a Scan
Related topics
Loading Originals
Adding and Assigning Scan Jobs with Document Capture Pro - Windows
You can view, change, or add available default scan settings when you scan using the start button on
your product. You do this by accessing the scan jobs in the Document Capture Pro program.
Note: The settings may vary, depending on the software version you are using. See the help information
in Document Capture Pro for details.
1. Do one of the following to start Document Capture Pro:
• Windows 10: Click and select Epson Software > Document Capture Pro.
• Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select
Epson Software > Document Capture Pro.
Loading ...
Loading ...
Loading ...