FLUKE 729 30G FC User Manual for the Fluke 729 30G FC Pressure Calibrator with Fluke Connect, 30 psi, 2 bar

Loading ...

Automatic Pressure Calibrator

Tasks Menu

Current to Pressure Test (I/P)

Use this feature to calibrate a current to pressure (I/P)

converter with current source and pressure

measurements. See Figures 13 and 14:

1. From page 1 of the Tasks menu, push the arrows to

highlight Current to Pressure Test (I/P).

2. Push E or R.

3. From this screen, use the arrows, numeric keypad,

and E to change the values of the source current

and measure pressure.

Note

Make sure to push E after EACH value

change.

4. Once you enter the values, push D (Continue).

Tolerance of Range, Test Strategy, and Auto Settling

Time can be set from here.

To save these settings as a customized task, push

B (Save as Customized). You can then recall

the saved task from the Tasks menu.

5. Once you enter the parameters, push D

(Continue).

6. Push B (Manual Test) or D (Auto Test).

7. Adjust with C to go to 0%, 50%, and 100%.

8. Push A (As Left) to do the As Left test.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 729 30G FC Pressure Calibrator with Connect, 30 psi, 2 bar