Loading ...
Loading ...
Loading ...
Automatic Pressure Calibrator
Setup Menu
19
Setup Menu
Use the multi-page Setup menu to configure the Product
features.
Note
For some of the submenu functions, the Product
password is required. The default password is
1234.
To access the Setup menu, push S.
The Setup menu includes submenus for Product
configuration. The submenus are:
1. 729 Information
2. 729 Setup
3. Manage Users
4. Manage Test Results
5. Manage Screen Shots
6. Manage Custom Tasks
7. Maintenance
Push the arrow buttons, R, or E to access these
submenus. Alternatively, push the corresponding number
button for access. Push F to go to the previous menu.
To clear all stored files, push D (Clear All Files).
Enter the Product password to use this function. This
action clears all stored test results, screen shots, and
custom tasks.
The subsequent sections explain the Setup menu and
submenus.
Manage FC Devices (729 FC Only)
1. Enter the Setup menu.
2. Push B (Manage FC Device) to set 729 FC as
the primary device and discover other units that have
Fluke Connect. The connected product shows on the
display.
Push C (Enable Fluke Connect) to set 729 FC as
the secondary device so it can be discovered by the
Fluke Connect App on smart phone.
Locator
When the Product shows several FC devices on the
Fluke Connect screen, highlight a product and push
B (Locator). This causes the Fluke Connect button
on the listed product to flash repeatedly. The FC device
exits locator mode automatically or when B
(Locator) is pushed again.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...