Loading ...
Loading ...
Loading ...
9
0
Fax Settings (Available for LCD Screen and webpage)
(To access the setting, you need to install a fax module and a telephone line
first.)
*Factory Default
Item Description Option
Quality Select a document quality. *Standard/Fine/Super
Fine/Photo/Auto
Density
Lighten or darken an image.
1/2/3/*4/5/6/7
Header Sets header information for
outgoing faxes.
*Off/On
Footer
Sets ON if you wish to show
footer information for all
outgoing faxes.
*Off/On
Tone / Pulse Sets the product to tone- or
pulse-dialing mode.
*Tone /10 PPS/20 PPS
20 PPS applies only for China.
Tone and 10 PPS apply for any
countries except China.
Volume
Sets ON if you wish to turn
on the speaker during fax
communication.
Off/High/*Medium/Low
Redial
Sets the number of redial
attempts and redial interval
setting if the number dialed
is busy.
Redial Count (0/1/*2)
Interval (1min/*2min/3min)
DialTone Det
Sets ON to allow this product
to wait for and detect dial
tone before proceeding with
dialing.
Off/*On
Connect Time
Sets your connection time
after dialing and before
receiving signal.
30/*60/70/80/90 (Seconds)
Tx Level
Sets the level of
transmission signal.
0 ~ - 15 dBm
(*-13 dBm)
ECM
Choose ON if you wish to
enable the Error Correction
Mode to correct errors in
transmission due to bad
lines.
*Off/On
Starting Rate
Sets the level of starting
rate.
*Super G3/G3/Forced
Info Display
Show speed information
during transmission.
Off/*On
Codec
Specify or Disable Fax Codec
modes (MR、MMR).
*MMR/MR/MH
Loading ...
Loading ...
Loading ...