Loading ...
Loading ...
Loading ...
v
Safety Instruction
This printer is a page printer which is operated by means of a LSU (Laser Scanning Unit)
printhead. There is no possibility of danger from the LSU printhead, provided the printer is
operated according to the instructions in this manual. Since radiation emitted by the LSU
printhead is completely confined within protective housings and external covers, the LSU
beams cannot escape from the machine during any phase of user operation.
Do not place a coffee cup, vase, or other liquid-filled container on the machine. Spillage
can damage the machine’s electrical parts and insulation.
Take care not to drop paper clips, staples, or any other metal objects into the machine.
When clearing paper jams, refer to the instructions in this manual.
Before disconnecting the plug, turn the machine off. Make sure your hands are dry.
Hold the plug itself, not its cord, when disconnecting it from the receptacle.
Never attempt to open any fixed cover.
Do not attempt to alter the machine or its parts.
Under normal conditions the small quantities of ozone gas produced by the machine are
harmless. However, if the machine is used for an extended period or within a small room,
you should make sure that the area is adequately ventilated. Also ventilate the room if
you notice the machine smells after a period of frequent or extended use.
Do not modify this product, as a fire, electrical shock, or breakdown could result. If the
product employs a LSU print head, the LSU beam source could cause blindness.
Do not attempt to remove the covers and panels which have been fixed to the product.
Some products have a high-voltage part or a LSU beam source inside that could cause
an electrical shock or blindness.
If this product becomes inordinately hot or emits smoke, or unusual odor or noise,
immediately turn OFF the power switch, unplug the power cord from the power outlet,
and then call your authorized service representative. If you keep on using it as is, a fire
or electrical shock could result.
If this product has been dropped or its cover damaged, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your authorized
service representative. If you keep on using it as is, a fire or electrical shock could
result.
The inside of this product has areas subject to high temperature, which may cause
burns. When checking the inside of the unit for malfunctions such as paper mis-feed, do
not touch the locations (around the fusing unit, etc.) which are indicated by a 「Caution!
Hot Surface」caution label.
Do not store the machine’s consumables in any of these locations:
Where the temperature or humidity may be excessively high.
Where flammable items or liquids are stored.
In direct sunlight.
In
dusty conditions.
Loading ...
Loading ...
Loading ...