Loading ...
Loading ...
Loading ...
8845A/8846A
Users Manual
3-22
4. To adjust the display to the desired date and time, press either <-- or --> to select
a specific digit or the month.
With the desired digit or month selected, press the soft key labeled -- to decrement
the digit, or ++ to increment the digit.
5. Press the ENTER soft key to set the date and time and return to system menu.
Configuring the Remote Interface
Selecting an interface port, setting up the ports, and selecting the command set the Meter
will recognize is accomplished through the Instrument Setup key. For information on the
commands that will remotely control the Meter, refer to the Programmers Manual.
Checking the Meter’s Calibration Date
To read the Meter’s calibration date:
1. Press I
2. Press the CAL soft key as shown below.
0.5993
+
F1 F2 F3 F4 F5
caw034.eps
3. Press the CAL DATE soft key to display the date the Meter was last calibrated.
4. Press B to go back to the previous menu.
Resetting the Meter’s Default Settings
To reset the Meter’s default settings:
1. Press I to see the instrument setup menu.
2. Press the RESET soft key to reset the Meter.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...