Hikvision DS-K2812 User Manual

Loading ...

The door contact can be enabled with appropriate delay aer person with extended accesss

needs swipes her/his card.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Enable Locking Door when Door Closed

The door can be locked once it is closed even if the Door Locked Time is not reached.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

●

The duress code and super password should be dierent.

●

The duress code and super password should be dierent from the authencaon password.

●

The length of duress code and super password is according the device, usually it should

contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door to copy the parameters in the page to the

selected doors.

Note

The door or oor's status duraon sengs will be copied to the selected door as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

In the device list on the le, click to expand the door, select a card reader and you can edit the

card reader's parameters on the right.

Edit the card reader basic parameters in the Basic

Informaon page.

Note

●

The displayed parameters may vary for dierent access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

DS-K281X Series Access Controller User Manual

Loading ...

Hikvision DS-K2812 Access Controller