Loading ...
Loading ...
Loading ...
Channel Number
If you set 1 for Add Oine Device, input the channel number of the device. If you set 0 for Add
Oine Device, this eld is not required.
Alarm Input Number
If you set 1 for Add
Oine Device, input the alarm input number of the device. If you set 0 for
Add Oine Device, this eld is not required.
Serial Port No.
If you set 5 as the adding mode, input the serial port No. for the access control device.
Baud Rate
If you set 5 as the adding mode, input the baud rate of the access control device.
DIP
If you set 5 as the adding mode, input the DIP address of the access control device.
Hik-Connect Account
If you set 6 as the adding mode, input the Hik-Connect account.
Hik-Connect Password
If you set 6 as the adding mode, input the Hik-Connect account password.
6.
Click
and select the template le.
7.
Click Add to import the devices.
9.2.2 Reset Device Password
If you forgot the password of the detected online devices, you can reset the device password via
the client.
Steps
1.
Enter Device Management page.
2.
Click Online Device to show the online device area.
All the online devices sharing the same subnet will be displayed in the list.
3.
Select the device from the list and click
on the Operaon column.
4.
Reset the device password.
-
Click Generate to pop up the QR Code window and click Download to save the QR code to
your PC. You can also take a photo of the QR code to save it to your phone. Send the picture
to our technical support.
Note
For the following operaons for reseng the password, contact our technical support.
DS-K281X Series Access Controller User Manual
37
Loading ...
Loading ...
Loading ...