Hikvision DS-K2812 User Manual

Loading ...

Chapter 8 Acvaon

You should acvate the device before the rst login. Aer powering on the device, the system will

switch to Device

Acvaon page.

Acvaon via the device, SADP tool and the client soware are supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 8000

●

The default user name: admin

8.1

Acvate via SADP

SADP is a tool to detect, acvate and modify the IP address of the device over the LAN.

Before You Start

●

Get the SADP soware from the supplied disk or the ocial website hp://

www.hikvision.com/en/ , and install the SADP according to the prompts.

●

The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to acvate a device and modify its IP address. For batch acvaon

and IP addresses modicaon, refer to User Manual of SADP for details.

Steps

Run the SADP soware and search the online devices.

Find and select your device in online device list.

Input new password (admin password) and

conrm the password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

Note

Characters containing admin and nimda are not supported to be set as acvaon password.

Click Acvate to start acvaon.

DS-K281X Series Access Controller User Manual

Loading ...

Hikvision DS-K2812 Access Controller