Hikvision DS-K2812 User Manual

Loading ...

You can input 0, 2, 3, 4, 5, or 6 which indicated dierent adding modes. 0 indicates that the

device is added by IP address or domain name; 2 indicates that the device is added via IP

server; 3 indicates that the device is added via HiDDNS; 4 indicates that the device is added via

EHome protocol; 5 indicates that the device is added by serial port; 6 indicates that the device

is added via Hik-Connect.

Address

Edit the address of the device. If you set 0 as the adding mode, you should input the IP address

or domain name of the device; if you set 2 as the adding mode, you should input the IP

address of the PC that installs the IP Server; if you set 3 as the adding mode, you should input

www.hik-online.com.

Port

Input the device port No. The default value is 8000.

Device

Informaon

If you set 0 as the adding mode, this eld is not required; if you set 2 as the adding mode, input

the device ID registered on the IP Server; if you set 3 as the adding mode, input the device

domain name registered on HiDDNS server; if you set 4 as the adding mode, input the EHome

account; if you set 6 as the adding mode, input the device serial No.

User Name

Input the device user name. By default, the user name is admin.

Password

Input the device password.

Cauon

The password strength of the device can be automacally checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at

least three kinds of following categories: upper case leers, lower case leers, numbers, and

special characters) in order to increase the security of your product. And we recommend you

reset your password regularly, especially in the high security system, reseng the password

monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Add Oine Device

You can input 1 to enable adding the

oine device, and then the soware will automacally

connect it when the oine device comes online. 0 indicates disabling this funcon.

Export to Group

You can input 1 to create a group by the device name (nickname). All the channels of the

device will be imported to the corresponding group by default. 0 indicates disabling this

funcon.

DS-K281X Series Access Controller User Manual

Loading ...

Hikvision DS-K2812 Access Controller