Loading ...
Loading ...
Loading ...
9. Programming (S Mode) ELP-301016
9.2 PLU File (S1 Mode)
57
9.2 PLU File (S1 Mode)
The PLU File mode is used to program commodity or PLU information directly into the scale.
There are 3 different types of PLU’s available, Weigh Mode, Non Weigh Mode and By Count
Mode. Each of the different types contains information that is similar such as name, price,
expiration dates and ingredients. Each PLU type also contains some information that is unique
based on the PLU type selected. The programming of each PLU type is explained separately in
this section.
Note: Before entering any PLU information it is recommended to complete the programming
of the S Mode – S0 PLU Fields Visible. This will ensure that all of the necessary PLU
Fields will be available during the process of programming different types of PLU
information.
9.2.1 Programming a Weigh Mode PLU (S1 Mode)
In the example below the PLU Fields that will be used have been programmed using the
S Mode – PLU Fields Visible examples in the previous section.
Ex.) Create a Weigh Mode PLU for Ground Beef that has a Tare Weight of .05 lbs and a
Unit Price of $2.99/lb.
Note: You may save the information entered at any time and exit this program by pressing
the SAVE key then the FEED/ESC key. You may also exit this program without saving
any entered information by pressing the FEED/ESC key at any time.
1.) Start at the normal weigh mode screen
2.) Press the Mode Key twice
3.) Press the Print/* key
Loading ...
Loading ...
Loading ...