Loading ...
Loading ...
Loading ...
8. Basic Operations ELP-301016
8.1 Setting the ZERO Point
21
8. BASIC OPERATIONS
In this section, basic R mode operations such as recalling a commodity, entering a tare weight,
weighing and issuing labels, etc. are explained.
8.1 Setting the ZERO point
The ZERO key may be used to make corrections for minor deviations in the zero reference
point. The scale may drift from zero due to environmental conditions, debris on the platter or
leaving objects on the platter for long periods of time. To correct this, remove all objects and
debris from the platter. When the ST tri-mark ( ) is lit, press the ZERO key.
Ex.)
The scale Weight display should now show zero. If the scale will not return to Zero, contact
your authorized service representative.
8.2 Recalling a Commodity (PLU)
There are three methods of recalling a commodity or PLU. These methods are used to recall
Weigh, Non-Weigh and By Count mode commodities (PLU’s). The procedure is the same for all
of the PLU types.
8.2.1 Using the PLU key
To recall a PLU from memory input the PLU number using the numeric keys and then
press the PLU key.
Ex.) Recall PLU #12
Action: Enter 12 using the numeric keypad, then press the PLU key.
Loading ...
Loading ...
Loading ...