Loading ...
Loading ...
Loading ...
4. Getting Started ELP-301016
4.1 Installing the Scale
6
4. GETTING STARTED
4.1 Installing the Scale
The scale should be installed on a sturdy level surface with an adequate ventilation area around
it. There should also be enough area around the scale to allow for easy operation of the scale,
meaning room to change label rolls when necessary, etc. Failure to do so will decrease the
overall operational efficiency of the scale.
CAUTION
This symbol indicates that there is risk of personal injury
or damage to objects if the machine is improperly
handled during this operation or action.
When installing the scale avoid locations that place the scale in areas of:
• direct sunlight • temperatures outside of the specifications • high humidity
• vibration • rapid temperature changes • open flame
• moisture • devices that produce electrical interference • dust
• wind
Failure to follow these suggestions may result in incorrect operation of the scale.
WARNING
This symbol indicates that there is risk of personal injury
or damage to objects if the machine is improperly
handled during this operation or action.
4.2 Plugging in the Scale
Only insert the plug into a properly rated outlet.
Do Not plug the scale into an outlet with other electrical appliances. Other electrical appliances
may consume a large amount of power when operating which may affect the scale’s operation.
Do Not use an extension cord.
Do Not insert or remove the plug with wet hands.
Do Not excessively bend, pull on, damage, place a heavy object on or heat the power cord.
Make sure to fully insert the plug into the AC outlet.
Make sure to only hold and pull on the plug when inserting or removing the power cord. Pulling
on the cord instead of the plug may bread the wires internally causing a fire or shock hazard.
Make sure the scale power is off prior to inserting the plug. Failure to do so may result in a short
circuit and machine failure.
Loading ...
Loading ...
Loading ...