Loading ...
Loading ...
Loading ...
Safety Summary ELP-301016
( ii )
If foreign objects (metal
fragments, water, and liquids)
enter the machine, first turn off
the power switch and
disconnect the power cord
from the outlet, and then
contact your Service
Representative. Continued use
of the machine in that
condition may cause fire or
electric shock.
When unplugging the power
cord, be sure to hold and pull
on the plug portion. Pulling on
the cord portion may cut or
expose the internal wires and
cause fire or electric shock.
Ensure that the equipment is
properly grounded. Extension
cables should also be grounded.
Fire or electric shock could
occur on improperly grounded
equipment.
Do Not remove covers, repair
or modify the machine by
yourself. You may be injured by
high voltage, very hot parts or
sharp edges inside the
machine.
CAUTION
This symbol indicates that there is risk of personal injury or damage to
objects if the machine is improperly handled during this operation or
action.
Precautions
The following precautions will help to ensure that this machine will continue to function correctly.
• Try to avoid locations that have the following adverse conditions:
• Temperatures out of the Specification • Direct Sunlight • High Humidity
• Shared Power Source • Excessive vibration • Dust/Gas
Do Not subject the machine to sudden shocks.
Do Not press the keys too hard. Keys will operate correctly if they are touched lightly.
Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out
thoroughly. Never use thinner or other volatile solvent for cleaning.
To ensure that the scale is operating correctly, place a known weight on the platter and check it for correct weight
measurement. This should be done every morning before starting normal operations.
When moving the machine, take hold of the case and lift the machine. Never pick up the machine by the remote display
unit.
Do Not place the machine on an unstable or slanted surface as the machine may drop or fall and cause injury.
Use only
DB Scale approved thermal paper supplies. Do Not store thermal paper where it may be exposed to direct
sunlight, high temperatures, high humidity, dust or gas.
Ensure that the scale is operated on a level surface.
Any data stored in the machine may be lost or corrupted during a machine fault. Backup your critical information on a
regular basis.
Try to avoid using the scale on the same power source as high voltage equipment or equipment likely to cause mains
interference.
Unplug the machine whenever you are working inside it or cleaning it.
Do Not block the ventilation slots of the scale as this will cause overheating which may cause damage to the internal
circuit boards or even fire.
Loading ...
Loading ...
Loading ...