Loading ...
Loading ...
Loading ...
20
INSTALLING CARTRIDGE FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the powerhead and place in an upside-down position.
3. Install the cartridge lter over the lter cage making sure the cage is completely covered (Fig. 2 & 3).
4. Place the lter retainer on the top of the cartridge lter over the raised lip and tighten down by
turning the retainer clockwise; do not over-tighten (Fig. 4 & 5).
5. Place the powerhead back onto the collection tank.
REMOVING & CLEANING CARTRIDGE FILTER
1. Unlock and remove the lter retainer by turning the retainer handle counter-clockwise (Fig. 6).
2. With the removed powerhead in an upside-down position, carefully remove the cartridge lter from
the lter cage (Fig. 7).
3. Clean the cartridge lter by gently brushing or rinsing off the debris (Fig. 8). Cleaning should not be
done indoors in living areas. For optimal performance a new lter is recommended.
4. Install cleaned or new lter as described in steps 2-4 of Installing Cartridge Filter.
I NSTALLI NG & CLEANI NG
CARTRI DGE FI LTER
4
1
5
6
3
2
8
7
Loading ...
Loading ...
Loading ...