Loading ...
Loading ...
Loading ...
19
EMPTYING THE COLLECTION TANK
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Press down the orange latch on the cleaning solution delivery tube and unplug the delivery tube
from the vacuum. Then disconnect the hose from the vacuum (Fig. 2).
3. Disconnect the cleaning solution tube from the cleaning solution tank (Fig. 3).
4. Undo the latches and remove the powerhead from the collection tank (Fig. 4). Place the powerhead
on a soft, clean surface upside down.
5. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 5).
6. Clean or replace the lters.
7. Check the hose, attachments, and power cord to ensure that they have not been damaged.
8. Place the powerhead back onto the collection tank and secure latches.
IMPORTANT! Clean or change the lter regularly for best performance. ALWAYS USE THE
CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge lter, the
motor will burn out and the warranty will be voided. Always keep spare lters on hand.
NOTICE! The lters included are made of high-quality materials designed to stop small dust particles.
The cartridge lter should be used for dry pick-up only. A dry cartridge lter is necessary to pick up
dust. If the cartridge lter is wet, it will clog quickly and be very difcult to clean. Handle the lter
carefully when removing it for cleaning and replacing it. Check the lters for tears or small holes. A
small hole can let dust pass through and out of the lter. Do not use a lter with holes or tears; replace
it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be cleaned and stored so they can be readily available when needed. Store the wet/dry
vacuum indoors.
REPAIRS
Repairs for this wet/dry shampoo vacuum should be performed only by qualied service personnel
using only identical replacement parts.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWERHEAD FROM COLLECTION TANK.
MAI NTENANCE
4
1
5
3
2
Loading ...
Loading ...
Loading ...