Loading ...
Loading ...
Loading ...
11
A Phillips head screw driver is required.
GENERAL ASSEMBLY I NSTRUCTI ONS
3
1
2
7
8
5
9
6
4
10
11 12
13
14
15
16
19
17
18
①
Detergent
Mode
Vacuum
Mode
Detergent
Mode
Vacuum
Mode
WARNING:
DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE
SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY SHAMPOO
VACUUM. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.
UNPACKING YOUR WET/DRY SHAMPOO VACUUM & GENERAL ASSEMBLY
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Undo the latches (Fig. 2).
3. Lift the powerhead off the collection tank (Fig. 3).
4. Remove the contents from inside the collection tank; make sure you have all contents as listed on
page 8.
5. Turn the collection tank upside down and insert the two front caster feet into the slots on the
collection tank and tighten with supplied screws. Verify that the casters are mounted correctly. Do
not over-tighten the screws (Fig. 4).
6. Insert the two rear casters into the slots and apply pressure until they click into place (Fig. 5).
7. Insert the handle into the slots located on the top of the powerhead and secure it with the screws
provided. Do not over-tighten the screws (Fig. 6).
Loading ...
Loading ...
Loading ...