Loading ...
Loading ...
Loading ...
SDS1000X HD Series User Manual
206 i nt.si gle nt.co m
28 Arbitrary Waveform Generator
28.1 Overview
The SDS1000X HD supports arbitrary waveform/function generation by incorporating an external
USB Arbitrary Waveform Generator accessory combined with the software activation using option
SDS1000XHD-FG.
The AWG functions include:
6 basic waveforms: Sine, Square, Ramp, Pulse, Noise, and DC
45 built-in arbitrary waveforms
Output frequency up to 25 MHz
-3 V ~ +3 V output amplitude range
±42 Vpk insulation voltage (for SAG1021I only)
Refer to the datasheet for the detailed specifications of the AWG.
SAG1021I Function/Arbitrary Waveform Generator Module
The SAG1021I function/arbitrary wave generator module
is capable of generating variant waveforms with
frequencies up to 25 MHz and amplitudes up to ± 3 V. Its
output terminals are isolated from the ground of the
oscilloscope.
Connect the SAG1021I to any USB host port of SDS1000X HD using a standard USB cable. Users
can edit and import arbitrary waveforms using the SIGLENT EasyWave software or import edited
waveforms through a U-disk.
SDS1000XHD-FG Option
For the installation of the SD1000XHD-FG option, please refer to the section "Install Options".
The oscilloscope interface will prompt "AWG device detected" after the hardware connection with the
SAG1021I is established. Press the WaveGen button on the front panel, or touch the menu
Utility > Wave Gen… to recall the AWG dialog box.
Loading ...
Loading ...
Loading ...