Loading ...
Loading ...
Loading ...
SDS1000X HD Series User Manual
int siglent.com 109
In the Protocol Config menu of the decode, the baud rate can be set to: 2.5 Mb/s, 5.0 Mb/s, 10.0
Mb/s, or Custom.
The method of copying settings is the same as I2C signal settings. See "I2C Signal Settings" for
details.
16.7.2 FlexRay Serial Decode
The configuration of FlexRay decoding is similar to that of I2C decoding.
On the bus:
The signatures (CAS/MTS, WUP) are displayed in yellow-green.
TSS transmission start sequence, displayed in yellow-green. The null frame indicator, the Sync
frame indicator, and the Startup frame indicator are displayed in the frame and displayed in pink.
The ID is displayed in the frame and is displayed in green.
PL (Valid Data Length) is displayed in frames, in words, and in light yellow.
HCRC (Head Check Code) is displayed in the frame and displayed in blue.
CYC (cycle) is displayed in the frame and displayed in light yellow.
D (data) is displayed in the frame and displayed in white.
FCRC (Data Check Code) is displayed in the frame and displayed in blue.
In the list view:
Time -- The horizontal offset of the current data frame head relative to the trigger position.
FID -- Frame ID, the symbol occupies a single line of the list.
Loading ...
Loading ...
Loading ...