SDS1000X SDS1000X HDUser Manual

Loading ...

SDS1000X HD Series User Manual

192 i nt.si gle nt.co m

26.2 Configuration

26.2.1 Connection

A. DUT input and output channels

B. Channel gain. When it is set to Auto, the oscilloscope will automatically adapt the vertical scale

according to the signal amplitude; when it is set to Hold, it will always keep the vertical scale

before the test operation

C. Arbitrary waveform generator connection settings. Touch Interface to select the connection

type. When selecting LAN, it needs to Set IP and Save it. Touch Test to confirm

whether the arbitrary waveform generator is connected correctly.

26.2.2 Sweep

Touch Sweep Type to select the sweep type. There are two types: Simple and variable level.

A. Set the sweep type

B. Set the sweep as Continue or Single

C. Set the sweep frequency. The frequency mode can be linear or decade. When it is set to linear,

the corresponding center frequency and span frequency need to be set; when it is set to a decade,

the corresponding start frequency and stop frequency need to be set

D. Set the number of sweep points. The larger the number of points, the higher the sweep resolution

E. Set the amplitude of the sweep signal

F. Set the offset of the sweep signal

G. Set the signal amplitude unit. When it is set to dB, reference level and load need to be set

H. Set the load

Loading ...

Siglent SDS1000X