Loading ...
Loading ...
Loading ...
66
After the above parameters are set, click “Save” to save the settings. Then the camera will
automatically connect the third-party platform. The online state can be viewed in the above
interface. After the camera is successfully connected, it will send the alarm information (HTTP
format) to the third-party platform once the smart alarm is triggered. The alarm information
includes target tracing coordinates, target features, the captured original/target image (like the
captured face picture, motor vehicle picture) and so on.
4.6.13 HTTPS
HTTPs provides authentication of the web site and protects user privacy.
Go to Config →Network→HTTPS as shown below.
There is a certificate installed by default as shown above. Enable this function and save it.
Then the camera can be accessed by entering https://IP: https port via the web browser (e. g.
https://192.168.226.201:443).
A private certificate can be created if users don’t want to use the default one. Click “Delete” to
cancel the default certificate. Then the following interface will be displayed.
*If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
*Click “Create a private certificate” to enter the following creation interface.
Click the “Create” button to create a private certificate. Enter the country (only two letters
available), domain (camera’s IP address/domain), validity date, password, province/state,
region and so on. Then click “OK” to save the settings.
Loading ...
Loading ...
Loading ...