Loading ...
Loading ...
Loading ...
18
Lens Distortion Correction: When the image appears distortion to some extent, please
enable this function and adjust the level according to the actual scene to correct the distortion.
Frequency: 50Hz and 60Hz can be optional.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways. 0,
90, 180 and 270 are available. The default value is 0.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Illumination Mode: Choose “White light”, “Infrared light” or “Smart supplement light” as
needed.
Smart supplement light: If selected, in low ambient light, the system will automatically turn
on the IR light or white light. Once there are people appearing in the detection area, it will
automatically switch to white light. When no people are detected, it will switch to IR light.
If “White Light” is selected, “Overexposure control” and “white light mode” can be configured.
Overexposure Control: Choose “OFF”, “Low”, “Mid” or “High”. This function can
automatically adjust the exposure parameter according to the actual effect of the image,
effectively avoiding detail missing caused by image overexposure, so that the image will be
more vivid. Please set it as needed.
White Light Mode: Choose “Off”, “Auto” or “Manual”. Please select it as needed.
Infrared Mode: Choose “Auto”, “ON” or “OFF”.
Schedule Settings of Image Parameters
Click the “Profile Management” tab as shown below.
Set full time schedule for common, day, night mode and specified time schedule for day and
night. Choose “Timing” in the drop-down box of schedule as shown below.
Drag “ ” icons to set the time of day and night. Blue means day time and blank means night
time. If the current mode of camera parameters is set to schedule, the image configuration
mode will automatically switch between day and night according to the schedule.
Loading ...
Loading ...
Loading ...