Loading ...
Loading ...
Loading ...
39
All of the three types of objects can be selected simultaneously. Please select the detection
objects as needed. If no object/target is selected, alarms will not be triggered even if intrusion
detection is enabled.
2. Set the alarm holding time and alarm trigger options.
3. Set alarm trigger options. The setup steps are the same as motion detection. Please refer
to 4.4.1 Motion Detection for details.
4. Click the “Save” button to save the settings.
5. Set the alarm area of the region entrance detection. Click the “Area” tab to go to the
interface as shown below.
Set the alarm area number on the right side. Up to 4 alarm areas can be added.
Click the “Draw Area” button and then click around the area where you want to set as the
alarm area in the image on the left side (the alarm area should be a closed area). Click the
“Stop Draw” button to stop drawing. Click the “Clear” button to delete the alarm area. Click the
“Save” button to save the settings.
6. Set the schedule of the region intrusion detection. The setup steps of the schedule are
the same as schedule recording setup (See 4.1.4.1 Schedule Recording Settings).
Loading ...
Loading ...
Loading ...