Loading ...
Loading ...
Loading ...
49
3. Set alarm holding time and alarm trigger options. The alarm trigger setup steps are the
same as motion detection setup. Please refer to 4.4.1 Motion Detection chapter for
details.
Trigger alarm condition: all or mask off can be selectable.
⚫ All: Alarms will be triggered when the camera detects a face (with/without a mask).
⚫ Mask off: Alarms will be triggered when the detected person is not wearing a mask on the
face.
4. Set alarm detection area.
Click “Draw Area” and drag the border lines of the rectangle to modify its size. Move the
rectangle to change its position. Click “Stop Draw” to stop drawing the area. Click “Clear” to
clear the area. Then set the detectable face size by defining the maximum value and the
minimum value (The default size range of a single face image occupies from 3% to 50% of the
entire image).
5. Advanced settings. Choose the snapshot interval and number as needed to avoid
capturing multiple similar pictures in a very short period of time.
Snapshot Interval: If 5 seconds is selected, the camera will capture the same target once
every 5 seconds during its continuous tracking period.
Loading ...
Loading ...
Loading ...