Loading ...
Loading ...
Loading ...
6
2.2 WAN
Access through the router or virtual server
1. Make sure the camera is connected to the local network and then log in the camera via
LAN and go to Config→Network→Port menu to set the port number.
Port Setup
2. Go to Config →Network→TCP/IP menu to modify the IP address.
IP Setup
3. Go to the router’s management interface through IE browser to forward the IP address
and port of the camera in the “Virtual Server”.
Router Setup
4. Open the IE browser and enter its WAN IP and http port to access. (For example, if the
http port is changed to 81, please enter “192.198.1.201:81” in the address bar of web
browser to access).
Loading ...
Loading ...
Loading ...