Loading ...
Loading ...
Loading ...
AXIS P1204 Network Camera
Hardware Overview
1. Cut the cable to the desired length. Measure from the sensor unit.
2. Strip the plastic outer coating from the end of the cable.
3. Peel back the shield.
4. Flatten the colored wires in the order describe d be low .
1
Brown
2
White/brown
3
Not used
4
Not used
5
White/blue
6
Blue
5. Insert the wires all the way into a shielded 6P6C RJ12 connector. Make sure that the wires stay in the correct order.
6. Use a crimping tool to fasten the connector to the cable.
14 mm 14 mm
6
1
6
Loading ...
Loading ...
Loading ...