Axis P1204 Miniature HDTV Network Camera 0531-001

USER MANUAL - Page 40

For P1204.

PDF File Manual, 48 pages, Read Online | Download pdf file

P1204 photo
Loading ...
Loading ...
Loading ...
AXIS P1204 Network Camera
System Options
NOTICE
Improper use may cause unexpected behavio r and loss of contact with the Axis product.
Axis strongly recomm ends that you do not use this function unless y ou understand the consequences. Axis Support does not provide
assistance for problem s with customized scripts.
To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a backup le be fore
customizing the scripts. If a script causes problems, reset the product to its factory default s ettings, see page 40.
For m ore information, see www.axis.com/developer
File Upload
Files, fo r example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a le , go
to System Options > Advanced > File Upload.
Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where <user> is the
selected user group (viewer, operator or administrator) for the uploaded le.
Plain Cong
Plain Con g is for advanced users with experience of Axis product conguration. M ost parameters can be set a nd modied from this
page. Help is available from the standard help pages.
To open Plain Cong, go to System Options > Advanced > Plain Cong.
Reset to Factory Default Settings
This will reset all param eters, including the IP address, to the fa c tory default settings:
1. Disconnect power from the product.
2. Press and hold the Control button and reconnect power (see Hardware Overview o n page 4 ).
3. Keep the Control button pressed for about 15 seconds until the Status indicator ashes amber.
4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The
product has been reset to the factory d efault settings. The default IP address is 192.168.0.90
5. Re-assign the IP address.
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.
40
Loading ...
Loading ...
Loading ...