Loading ...
Loading ...
Loading ...
en Troubleshooting
24
Sample recipe
You can find a sample recipe that has been
specially developed for your appliance
here.
Ground peanuts
Ingredients
¡ 1500-2000g fresh raw peanuts
Preparation
¡ Prepare the meat mincer attachment
with the fine perforated disc and fit.
¡ Add the peanuts to the filling tray.
¡ Set the rotary switch to
.
¡ Add the peanuts to the filling shaft evenly
during processing and press down with
the pusher.
¡ Process the entire quantity within
2minutes.
Note:The recommended continuous oper-
ating time is 2minutes.
Troubleshooting
Troubleshooting
Troubleshooting
Fault Cause and troubleshooting
Appliance does not start
processing.
Rotary switch is set incorrectly.
▶
Set the rotary switch to
before processing.
Food is not being pro-
cessed although the
main unit is running.
Food has got stuck and is blocking the attachment.
1.
Set the rotary switch to
and wait until the appliance
stops.
2.
Set the rotary switch to
for a few seconds to start the
reversing function and release the food that has got
stuck.
3. Wait until the appliance stops.
4.
Set the rotary switch to
and check whether the food
is being processed normally again.
Note:If the fault cannot be eliminated in this manner, ob-
serve the following steps.
1.
Set the rotary switch to
and wait until the appliance
stops.
2. Pull out the mains plug.
3. Remove the attachment and take it apart.
4. Remove food that has got stuck und check whether the
attachment or the food contains any sinews, bones or
other hard pieces.
The clutch of the worm conveyor has been overloaded and
has broken at the predetermined breaking point.
Note:Spare parts with a predetermined breaking point are
not covered by our warranty obligations. A new clutch is
available from customer service under order number
10029225.
1. Release the screw and remove the faulty clutch.
→Fig. 40
2. Insert the new clutch and screw in tight.
→Fig. 41
Loading ...
Loading ...
Loading ...