Loading ...
Loading ...
Loading ...
About the Diagnostic Tool
BATTERY REPLACEMENT
6 Craftsman 87702
On some Asian and European vehicles the DLC is located
behind the “ashtray” (the ashtray must be removed to access it)
or on the far left corner of the dash. If the DLC cannot be
located, consult the vehicle’s service manual for the location.
BATTERY REPLACEMENT
Replace batteries when the battery symbol is visible on display
and/or the 3 LEDS are all lit and no other data is visible on screen.
1. Locate the battery cover on the back of the Diagnostic Tool.
2. Slide the battery cover off (use your fingers).
3. Replace batteries with two AA-size batteries (for longer life, use
Alkaline-type batteries).
4. Reinstall the battery cover on the back of the Diagnostic Tool.
Adjustments After Battery Installation
The first time the unit is turned on, you must select the desired display
language (English, French or Spanish) and unit of measurement (USA
or Metric) as follows:
1. Press the POWER/LINK
button to
turn the Diagnostic Tool “ON.”
The Select Language screen
displays.
2. Use the DOWN
button to highlight
the desired display language.
3. When the desired display language is
selected, press the ENTER
button to
confirm your selection.
The Select Unit screen displays.
4. Use the DOWN
button to highlight
the desired unit of measurement.
5. When the desired unit of measurement is selected, press the
ENTER
button to confirm your selection.
After the initial language and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 60 for further instructions.
Loading ...
Loading ...
Loading ...