Loading ...
Loading ...
Loading ...
Using the Diagnostic Tool
VIEWING ABS DTCs
48 Craftsman 87702
If the Diagnostic Tool fails to link to the
vehicle’s computer, a “Linking Failed”
message shows on the Diagnostic
Tool’s display.
- Verify the connection at the DLC,
and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then turn back ON to reset
the computer.
3. To read the display:
Refer to DISPLAY FUNCTIONS on page 9 for a description of
LCD display elements.
A visible icon indicates that the Diagnostic Tool is being
powered through the vehicle’s DLC connector.
A visible icon indicates that the Diagnostic Tool is linked to
(communicating with) the vehicle’s computer.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
If the definition for the currently
displayed code is not available, an
advisory message shows on the
Diagnostic Tool’s display.
I/M MONITOR STATUS icons are
not displayed when viewing ABS
DTCs.
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information. Use the
DOWN
button to view the additional information.
The Diagnostic Tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a "No ABS DTC’s
are presently stored in the vehicle’s
computer" is displayed. Press the M
button to return to the previous
Menu.
4. If more than one code was retrieved press the DTC
button, as
necessary, to display additional codes one at a time.
Loading ...
Loading ...
Loading ...