Loading ...
Loading ...
Loading ...
Using the Diagnostic Tool
VIEWING ENHANCED DTCS
Craftsman 87702 41
The Diagnostic Tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “No Enhanced
DTC’s are presently stored in the
vehicle’s computer” is displayed.
Press the M
button to return to the
Main Menu.
3. If more than one code was retrieved press the DTC
button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Diagnostic Tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
button again.
4. When the last retrieved DTC has been displayed and the DTC
button is pressed, the Diagnostic Tool returns to the “Priority Code”.
To view additional enhanced DTCs, repeat steps 1 through 4,
above.
To exit the enhanced mode, press the M button. The
Diagnostic Tool returns to the Main Menu screen.
Ford/Mazda Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.
When the Diagnostic Tool enters the “enhanced” mode (and Ford is
selected, if prompted), the Ford Enhanced menu displays. You may
view DTCs for either the “Continuous Memory Test”, “KOEO (Key On
Engine Off) Test” or “KOER (Key On Engine Running) Test.”
1. Use the DOWN
button to highlight the
desired option, then press the ENTER
button.
When choosing to view KOER
Test DTCs, start the vehicle’s
engine before making your
selection.
If the Diagnostic Tool fails to link to
the vehicle’s computer, a “Linking
Failed” message shows on the
Diagnostic Tool’s display.
- Verify the ignition is ON, then
press the M button to continue.
Loading ...
Loading ...
Loading ...