Loading ...
Loading ...
Loading ...
Page 45
The pump was lled with oil at the factory. Refer to the MAINTENANCE SCHEDULE CHART
for proper service intervals and oil type.
PUMP MAINTENANCE
2
3
1
1. Loosen the pump oil ll plug.
2. Place a container under the oil drain plug.
3. Remove the oil drain plug.
4. After the oil has drained, insert the oil drain plug; tighten securely.
5. Refer to MAINTENANCE SCHEDULE CHART for the proper oil type for your pump.
6. Make sure the oil level meets but does not exceed the dot in the center of the sightglass.
7. Insert the oil ll plug; tighten securely.
How to change the pump oil
ENGINE MAINTENANCE
Before each use, check the engine for loose or damaged parts, signs of oil or fuel leaks
and/or any condition that may aect proper, safe operation. Always keep all guarding
in place and proper working order. Repair or replace defective parts immediately.
For safety reasons, the manufacturer recommends all engine service and repairs
(including emission control devices and systems) to be performed only by an
authorized service center. All warranty work and replacements must be performed by
an authorized service center.
For all other information on engine maintenance, refer to the engine manual.
1. Oil sight glass
2. Oil ll plug
3. Oil drain plug (not shown)
Note: Your pump may vary from
the one illustrated.
Loading ...
Loading ...
Loading ...