Loading ...
Loading ...
Loading ...
MOTOR OVERLOAD
This pressure washer is equipped with an overload protection device which will
automatically shut o the motor in the event the motor draws excessive current or
overheats.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for the electric current to reduce the risk of electric
shock. This product is equipped with a power supply cord having an equipment
grounding conductor and a grounded plug. The plug must be plugged into a properly
installed and grounded receptacle that meets all local codes and ordinances. DO
NOT use any type of grounding adapter.
Improper connection of the equipment grounding conductor can result in the risk of
electrocution. If in doubt of proper grounding, have a licensed electrician verify the
installation of the receptacle. Do not modify the plug provided with the product if it will not
t the receptacle installed. Do not use any type of adapter with this product.
ELECTRICAL GROUNDING
WARNING:WARNING:
GROUND FAULT CIRCUIT INTERRUPTER (GFCI) - (IF EQUIPPED)
This pressure washer is provided with a Ground Fault Circuit Interrupter (GFCI) built
into the plug of the power supply cord. This device provides additional protection
from the risk of electrical shock. Should replacement of the plug or cord becomes
necessary, use only identical replacement parts that included GFCI protection.
POWER SUPPLY AND ELECTRICAL INFORMATION
This cord should only be connected to an electrical outlet installed in accordance with
local codes and ordinances.
A. Inspect cord before using. Do not use if the cord is damaged in any way.
D. For a product rated 250 volts or less, single phase; this product is provided with a
ground fault circuit interrupter built into the plug. If replacement of the plug or cord is
necessary, use only identical replacement parts.
B. Keep all connections dry and o of the ground.
C. Do not touch the plug with wet hands.
E. In the situation where the power supply is rated above 250 volts and/or is three
phase, this product must be plugged into a receptacle protected by a ground fault
circuit interrupter.
F. Read the instruction manual(s) before using this product.
WARNING:WARNING:
To reduce the risk of electrocution, keep all connections dry and o the ground. Do
not touch the plug or power supply receptacle with wet hands!
Page 15
Loading ...
Loading ...
Loading ...