Loading ...
Loading ...
Loading ...
Page 20
PRESSURE WASHER OPERATING FEATURES
IMPORTANT! Become familiar with these features before operating the pressure washer.
PRESSURE ADJUSTMENTS (if applicable)
The pressure setting is preset at the factory to achieve optimum pressure and
cleaning. If you need to lower the pressure, it can be accomplished by the following
methods.
1. Back away from the surface to be cleaned. The further you hold the nozzle away
from the surface, the lower the pressure will be.
2. Use the widest possible nozzle pattern available. The wider the pattern of water,
the lower the pressure.
3. This pressure washer may be equipped with an additional feature that allows the
pressure setting to be adjusted
A. To lower the pressure, turn the unloader valve knob
counter-clockwise to the desired pressure.
B. To return the pump pressure to factory settings, turn the
unloader valve knob clockwise until it stops.
DO NOT over tighten the pressure control knob. If over tightened, the knob COULD break
and result in immediate loss of water pressure and costly repairs to the unit.
ADJUST WITH CARE
NOTICE
High-pressure spray can damage plants and other surfaces. To avoid causing damage,
cover plants before spraying near them, refer to the Nozzle Selection table in this manual
for correct nozzle selection, and test surfaces before spraying to make sure they are
strong enough to withstand high-pressure spray.
SPRAY DAMAGE
NOTICE
Loading ...
Loading ...
Loading ...