Hikvision DS-K1T342MX-E1 User Manual

Loading ...

Door Open Timeout Alarm

An alarm will be triggered if the door has not been closed within the congured me duraon.

Door Contact

You can set the door contact as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Closed.

Exit Buon Type

You can set the exit buon as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Open.

Door Lock Powering O Status

You can set the door lock status when the door lock is powering o. By default, it is Remain

Closed.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Door Remain Open Duraon with First Person

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Note

The duress code and the super code should be dierent.

Set Terminal Parameters

You can set terminal parameters for accessing.

Click Conguraon → Access Control → Terminal Parameters .

You can set Working Mode as Access Control Mode. The access control mode is the device normal

mode. You should authencate your credenal for accessing.

Click Save to save the sengs aer the conguraon.

Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.

DS-K1T342 Series Face Recognion Terminal User Manual

129

Loading ...

Hikvision DS-K1T342MX-E1 Face Recognition Terminal