Hikvision DS-K1T342MX-E1 User Manual

Loading ...

Table 7-2 Access Control Parameters Descripons

Parameter Descripon

Terminal Auth. Mode (Terminal

Authencaon Mode)

Select the face recognion terminal's authencaon mode. You

can also customize the authencaon mode.

Note

●

Only the device with the ngerprint module supports the

ngerprint related funcon.

●

Biometric recognion products are not completely applicable

to an-spoong environments. If you require a higher

security level, use mulple authencaon modes.

●

If you adopt mulple authencaon modes, you should

authencate other methods before authencang face.

Reader Auth. Mode (Card

Reader Authencaon Mode)

Select the card reader's authencaon mode.

Enable NFC Card Enable the funcon and you can present the NFC card to

authencate.

Enable M1 Card Enable the funcon and you can present the M1 card to

authencate.

M1 Card Encrypon Enabling the M1 card encrypon funcon can improve the card

security level. The card will not be copied easily.

Door Contact You can select "Open (Remain Open)" or "Close (Remian

Closed)" according to your actual needs. By default, it is Close

(Remian Closed).

Open Duraon Set the door unlocking duraon. If the door is not opened for

the set me, the door will be locked. Available door locked me

range: 1 to 255s.

Authencaon Interval Set the device authencang interval. Available authencaon

interval range: 0 to 65535.

Authencaon Result Display

Duraon (s)

Set the authencaon result displaying me duraon aer

authencaon.

Password Mode Plaorm-Applied Personal PIN

The PIN is managed and distributed by the plaorm. You

cannot set the PIN on the device of Web.

Device-Set Personal PIN

DS-K1T342 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T342MX-E1 Face Recognition Terminal