Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
4. Lower the oven door to the fully open
position. If the oven door does not open to
a full 90°, repeat steps 1 through 3.
5. Locate the oven door hinge locks in the
corners of the oven door, and rotate the
hinge locks toward the oven cavity to the
locked position. See Step 1 (illustration
A) in the “RemoveOven Door(s)” section
for proper locked position.
6. Close the oven door.
7. When the hinges are properly installed
and the door dosed, there should be an
even gap between the door and the
control panel. If one side of the oven
door is hanging lower than the other, the
hinge on that side is not properly
installed.
8. Connect Wire Harness.
31
Loading ...
Loading ...
Loading ...