Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY TIPS
IMPORTANT: Observe all governing codes and ordinances.
• Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum dearance with oven.
• Recessed installation area must provide complete enclosure around the
recessed portion of the oven.
• Grounded electrical supply is requier d. See "Electrical Requirements"
section.
• Electrical supply junction box should be located 3” (7.6 cm) maximum below the
support surface when the oven is installed in a wall cabinet. A 1” (2.5 cm)
minimum diameter hole should have been drilled in the right rear or left rear
comer of the support surface to pass the appliance cable through to the junction
box.
For under counter installation, it is recommended that the junction box be located
in the adjacent right or left cabinet. If you are installing the junction box on rear
wall behind oven, it is recommended that the junction box be recessed and
located in the upper Right of the cabinet
• Oven support surface must be solid,level and flush with bottom of cabinet
cutout.
• Floor must be able to support a single oven weight of 199 lb (90 Kg).
• Floor must be able to support a double oven weight of 331 lb (150 Kg).
IMPORTANT: To avoid damage to your cabinets, check with your builder or
cabinet supplier to make sure that the materials used will not discolor, delaminate
or sustain other damage. This oven has been designed in accordance with the
requirements of UL and CSA lntemational and complies with the maximum
allowable wood cabinet temperatures of 194 °F (90 °C)
25
Loading ...
Loading ...
Loading ...