Loading ...
Loading ...
Loading ...
81
6-4 Port Shaper
This section provides an overview of QoS Egress Port Shapers for all switch ports. Others the
user could get all detail information of the ports belong to the currently selected stack unit, as
reflected by the page header.
Web Interface
To configure the QoS Port Shapers in the web interface:
1. Click Quality of Service and Port Shaper.
2. Select which port need to configure QoS Egress Port Shaper.
3. Click which port need to enable, and configure the Rate limit condition.
4. Click Apply to save the configuration.
5. If you want to cancel the setting then you need to click the Reset button. It will revert
to previously saved values.
Figure 6-4: The QoS Egress Port Shaper
Parameter description:
Port :
The logical port for the settings contained in the same row. Click on the port number in
order to configure the shapers.
Queue Shaper
Queue :
The queue number of the queue shaper on this switch port.
Enable :
Controls whether the queue shaper is enabled for this queue on this switch port.
Rate(kbps) :
Controls the rate for the queue shaper. The default value is 1000000.
Loading ...
Loading ...
Loading ...