Loading ...
Loading ...
Loading ...
133
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period during
which the switch will not send new requests to a server that has failed to respond to a
previous request. This will stop the switch from continually trying to contact a server that it
has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if
more than one server has been configured.
Key :
The secret key - up to 63 characters long - shared between the RADIUS server and the
switch.
NAS-IP-Address :
The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If this field is
left blank, the IP address of the outgoing interface is used.
NAS-IPv6-Address :
The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. If this field is
left blank, the IP address of the outgoing interface is used.
NAS-Identifier :
The identifier - up to 255 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not included in the
packet.
Server Configuration
The table has one row for each RADIUS server and a number of columns, which are:
Delete :
To delete a RADIUS server entry, check this box. The entry will be deleted during the next
Save.
Hostname :
The IP address or hostname of the RADIUS server.
Auth Port :
The UDP port to use on the RADIUS server for authentication.
Acct Port :
The UDP port to use on the RADIUS server for accounting.
Timeout :
This optional setting overrides the global timeout value. Leaving it blank will use the global
timeout value.
Retransmit :
This optional setting overrides the global retransmit value. Leaving it blank will use the
global retransmit value.
Key :
This optional setting overrides the global key. Leaving it blank will use the global key.
Buttons
Adding New Server Entry :
Click to add a new RADIUS server. An empty row is added to the table, and the RADIUS
server can be configured as needed. Up to 5 servers are supported.
The button can be used to undo the addition of the new server.
Loading ...
Loading ...
Loading ...