Loading ...
Loading ...
Loading ...
161
PoE Config: Enabling the Auto Checking function can detect the
connection between PoE port and powered device. If you disable this function,
the detection will turn off.
Icon with blank node: When the PoE switch detects more than two IP
devices from the same port, the switch cannot resolve this IP devices’ layout,
instead, it will display a blank node to present this situation. Users can use
“Parent Node” function to adjust layout on the Dashboard.
Notification Console: It displays alarms and event logs. The notifications may include: 1.
User rebooted device (e.g., PoE); 2. Device off-line caused by network disconnection; 3.
IP duplicate; 4. Authentication failed when logging in to an IP camera.
Figure 13-3: The Notification Console
Monitor Console: It displays the traffics for device health check purposes.
For each IP device except the PoE switches, users can configure a threshold of
throughput, and acquire notifications when current throughput is lower or higher
than the configured settings.
If both values are “0”, it means the function is disabled.
The default polling interval is 1 second, when the Surveillance page is closed, the
Polling interval will change to around 5 seconds.
Loading ...
Loading ...
Loading ...