Loading ...
Loading ...
Loading ...
94
7-2 Region Config
The section describes to configure the basic identification of a MSTP bridge. Bridges
participating in a common MST region must have the same Region Name and Revision Level.
Web Interface
To configure the Region Config in the web interface:
5. Click Spanning Tree and Region Config.
6. Specify the Region Name and Revision Level.
7. Click the Apply to save the setting.
8. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 7-2: The Region Configuration
Parameter description:
Configuration Name :
The name identifying the VLAN to MSTI mapping. Bridges must share the name and revision
(see below), as well as the VLAN-to-MSTI mapping configuration in order to share spanning
trees for MSTI's (Intra-region). The name is at most 32 characters.
Configuration Revision :
The revision of the MSTI configuration named above. This must be an integer between 0
and 65535.
Buttons
Apply :
Click to save changes.
Reset :
Click to undo any changes made locally and revert to previously saved values.
Loading ...
Loading ...
Loading ...