Loading ...
Loading ...
Loading ...
57
3-5.3 Aggregation Hash Mode
Web Interface
To configure the Aggregation hash mode in the web interface:
1. Click Port Management, Link Aggregation and Aggregator Hash Mode.
2. Click Hash Code Contributors to select the mode.
3. Click the apply to save the setting.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 3-5.3: Aggregation Hash Mode
Parameter description:
Hash Code Contributors
src-mac :
Source MAC Address
The Source MAC address can be used to calculate the destination port for the frame. Check
to enable the use of the Source MAC address, or uncheck to disable. By default, Source MAC
Address is enabled.
dst-mac :
Destination MAC Address
The Destination MAC Address can be used to calculate the destination port for the frame.
Check to enable the use of the Destination MAC Address, or uncheck to disable. By default,
Destination MAC Address is disabled.
ip :
IP Address
The IP address can be used to calculate the destination port for the frame. Check to enable
the use of the IP Address, or uncheck to disable. By default, IP Address is enabled.
src-dst-mac :
Source MAC Address + Destination MAC Address.
src-ip :
Source MAC Address + IP Address.
dst-ip :
Destination MAC Address + IP Address.
src-dst-ip :
Source MAC Address + Destination MAC Address + IP Address.
Loading ...
Loading ...
Loading ...