Loading ...
Loading ...
Loading ...
146
Chapter 12 Maintenance
This chapter describes the entire switch Maintenance configuration tasks to enhance
the performance of local network including Save/Backup/Restore/Activate/Delete
Restart Device, Factory Defaults, Firmware upgrade.
12-1 Configuration
The switch stores its configuration in a number of text files in CLI format. The files are either
virtual (RAM-based) or stored in flash on the switch.
There are three system files:
running-config: A virtual file that represents the currently active configuration on the
switch. This file is volatile.
startup-config: The startup configuration for the switch, read at boot time.
default-config: A read-only file with vendor-specific configuration. This file is read when
the system is restored to default settings.
It is also possible to store up to two other files and apply them to running-config, thereby
switching configuration.
12-1.1 Save startup-config
This copy running-config to startup-config, thereby ensuring that the currently active
configuration will be used at the next reboot.
Web Interface
To save running configuration in the web interface:
1. Click Maintenance, Configuration and Save startup-config.
2. Click Save Configuration.
Loading ...
Loading ...
Loading ...