Loading ...
Loading ...
Loading ...
163
Group Console
You can also configure VLAN grouping in the Topology View. To configure grouping, proceed with the
following:
1. Enable the Grouping mode by selecting the “Group” menu from the Device List
menu. Select New Group from the pull-down menu. Single-click IP cameras or
servers to include them into group. When configuring an existing group, select an
existing group.
2. Select the members you prefer from the topology.
3. Enter a Group name, Description, and a unique VLAN ID. See the previous
chapter for details. VLAN ID is the VLAN identifier (VID) for the port as defined in
IEEE 802.1Q-2003. A value of 1 through 4094 is used to define a valid VLAN ID. A
value of 0 (Priority Tagged) is used if the device is using priority tagged frames as
defined by IEEE 802.1Q-2003, meaning that only the IEEE 802.1D priority level is
significant and the default PVID of the ingress port is used instead.
Organizationally Unique Identifiers (OUI) are the first three bytes of a MAC Address,
while the last three bytes contain a unique station ID. You can add a specific
manufacturer with the OUI. Enter the first 3 octets as the hexadecimal xx-xx-xx to
specify the device range.
When done, click the Apply button for the configuration to take effect. Click the Save
button to save your configuration.
Figure 13-4: Configuring Grouping in the Topology View
Loading ...
Loading ...
Loading ...